Imitation open shoe also has the difference between front opening and side opening.

1. front opening wide mouth shallow shoes design

As shown in figure 3-3-8, this is a long front face shallow shoe, and the front and back sides extend to form shoe ears, forming a front opening and wide opening structure.

When designing shoes and ear parts, do not exceed the midline, which is the same as the basic requirements of the front opening shoes.

The difference between the shoe and the inside and outside of the back is handled separately.

When designing shoes like this, they do not need tongue. In order to prevent grinding feet from using ribbons to bind feet, shoes rings are installed on both sides of the shoes ears, and ribbons are worn around the shoe rings to tie on the instep.

2. design of women's shallow shoes with front hourglass mouth

As shown in figure 3-3-9, there is a medium width gourd opening in front of the door, with a curved shoe line forming the shape of the shoe ear, with an eye position that can be worn with shoelaces and binding feet.

The process of shoe mouth is along the mouth.

The front end of the gourd mouth is provided with a girth. The skew of the girth is used as a reference for the previous opening, and does not make the difference between the inside and outside.

The design of the fence is the same as that of the other shoes.

Design of 3. side opening female shallow shoe

As shown in figure 3-3-10, the side openings are circular, similar to cat's eye, commonly known as cat's eye shoes.

The two sides of the cat's eye are connected with metal parts or pads. Because the shoe is a large part of the force, the simple connection strength is not enough, and a pparent mesh cloth can be placed under the cat's eye, which has both permeability and reinforcement.

The process of shoe mouth is along the mouth.