In the design, women's boots should be designed like men's boots.

Since the rear strap is an open structure, we should use the open frame design of the middle tube boot.

As shown in figure 5-4-3, the front part of the shoe is converted to pick up handles, and the rear shoe ears are designed to D points with 9 eye positions.

The height of the boot is higher and lower, and the height of the rear end is about 240mm, and the height of the front end is about 290mm.

 

Notice that there are 3 Dark stitches on the wrist position in front of the boot.

Because the front end of the boot is a midline and can not take the curved arc, the front end of the boot can turn into a curved arc through a dark seam.

Suture volume should be added from the upper end of the cylinder.

This straight-line bending process also belongs to craft seesaw.

If the dark seam is changed into a clear seam, a "seam ridge" shoe is formed.