When the packing rate reaches 90%,

After the container is towed, check it first, check the box number with the cabinet paper, keep the lead seal handed by the driver, and note the lead number.

When calculating the loading plan, remember

Cartons are not standard parts.

Before installing the cabinet, actually measure the size, not just the original data of the carton factory.

Moreover, many times the cartons of goods are mounted, which will slightly protruding in the middle. Therefore, it is prudent to maintain a gap of around two centimeters around the container when calculating.

{page_break}

When the new scheme is installed, if possible, first install along the sideline, ensure that the length, width and height are suitable, and then fill it tightly.

When loading cabinets, especially at the beginning, they must be pressed tightly unless the goods are not extrudable.

The principle is to be relaxed and tight.

The cartons are elastic, and they will be densely packed after stacking.

Before loading the cabinet, communicate with the loading and unloading foreman first, so that he can have a general understanding of the loading plan.

But don't slack off.

People are not very conscious when they are doing manual work, so pay attention to supervision next to them.

Unless it is obvious, it is not easy to accept the porter's advice. Many times, these suggestions are made for labour and convenience rather than reasonable loading.

Remember, there is a problem with the cabinet. You can't pass the buck to the worker.

Women's medium and short tube nylon yarn stockings silica gel particles, is the experience saves money and effective moisture-proof method, does not occupy the place, a 20 foot cabinet loses four or five bags about.