Home >

GB24613-2009 Mandatory Standard For Toy Coatings Will Take Effect From October 1St.

2010/10/22 15:32:00 36

??? 日本語 Fran?ais English 中文

Standard Packaging Toys

From October 1, 2010 onwards, the whole country

coating

And the paint Standardization Technical Committee put forward the mandatory toy coatings.

standard

GB24613-2009 "the limits of harmful substances in toy coatings" will come into effect in October 1, 2010.

This mandatory standard applies to all kinds of toy coatings, and specifies the limits, testing methods, and testing methods for harmful substances in toy coatings.

Packing

Identification and other requirements.

Suppliers who provide coatings for toy manufacturers should ensure that their products meet the requirements of the national standard.

Hazardous substance

Limit

total lead

Less than 600mg/kg

Soluble elements

Antimony (Sb)

Less than 60mg/kg

Arsenic (As)

Less than 25mg/kg

Barium (Ba)

Less than 1000mg/kg

Cadmium (Cd)

Less than 75mg/kg

Chromium (Cr)

Less than 60mg/kg

Lead (Pb)

Less than 90mg/kg

Mercury (Hg)

Less than 60mg/kg

Selenium (Se)

Less than 500mg/kg

O-phthalate two

O-phenyl two formic acid two -2- ethylhexyl ester (DEHP)

Less than 0.1%

Dibutyl phthalate (DBP)

Butyl benzyl ortho two benzoate (BBP)

Two ISO nonyl ester of ortho two carboxylic acid (DINP)

Less than 0.1%

Two isodecyl ortho two carboxylate (DIDP)

Two octyl phthalate two (DNOP)

Volatile organic compound content

Less than 720g/L

The sum of toluene, ethylbenzene and xylene

Less than 30%

benzene

Less than 0.3%

Remarks: it is only applicable to solvent based paints, and is tested according to the mixture ratio of the products.

If diluent is used in a certain range, it should be tested according to the recommended maximum dilution ratio.

In the normal production process, at least once a year, for finished products and coatings.

The following situations should also be tested:

Product design / production address / formulation / process / main raw material / ingredient ratio, update or change;

Production is resumed 3 months after the shutdown.

Regarding product label requirements, coating packaging must conform to the GB/T9750 standard, and the relevant labels need to be clearly shown on the package.

For two-component coatings or multi component coatings, the production formula must be marked in product packaging and user manuals.

The dilution ratio should be marked in the coating, packaging or user manual for the production process.