1: the collar face.

(straight material): collar fabric needs the best result of symmetry and harmony after forming according to fabric pattern, pattern and grain.

2: choose the lining (straight material): the collar should be made free of shrinkage and can be ironed. There is a certain toughness material. According to the requirements of the finished product size, the collar sample is cut. According to the thickness of the fabric, whether the double layer or other requirements can be decided, and the heavy clothes such as cotton clothes can be taken double layer.

3: adhesion aid

Use the pure sample collar and the auxiliary lining to paste. When the paste is placed, the iron should be placed in the middle of the lining of the collar and pressed to the sides. The left collar angle is raised with the left hand, and the iron is ironed in the right direction. With the iron pushing, the left collar hand is lifted up, and the other side is ironed and pasted in the same way, forming the potential of the lining, and a line is lined at the net collar edge 0.5CM, and the net collar and auxiliary lining are fixed to avoid deformation after washing.

After finishing, the auxiliary collar must be placed 1CM outside the net collar, and the excess part should be cut off.

4: the outer lining of auxiliary collar should not exceed 0.7CM, and the collar should be made to work. The effect should be as follows: collar, auxiliary lining, harmony between the inside and outside, leading the collar to produce a circle, and then scalding the collar.

5: the collar and collar stitch: the collar inside the collar is the shortest line in the collar, and the collar needs less 0.3CM than the collar. The suture line must be 0.3CM away from the collar.

6: ironing collar: first cut the cut on both sides of the collar, and play a horizontal line along the net collar to ensure the roundness of the collar.

7: upper collar: alignment of the middle seam.

Cut the upper collar line from the net collar 0.3CM.