In order to standardize the marking of shoes in China, we should promote our footwear products to the international market and promote the development and improvement of China's footwear industry.

The standard is drafted by the China Light Industry Association shoe Research Institute, written by Zhou Jing, Gao Zhi Xing and Qi Xiaoxia. It has been implemented since 1 L2, l998.

　　標準適用范圍

The standard specifies the shoe number identification method, and discusses the basic characteristics of the shoe number system named after the world shoe number (Mondopoint).

　　最新《鞋號》國家標準介紹

The meaning of "1. shoes" is infinite, including shoes, boots, slippers, sandals and all other types of footwear.

2. measuring value of shoe number foot. According to this, it can provide shoes for feet.

3. the horizontal distance between the vertical line contacted by the end point of the longest toe and the vertical money touched by the heel point should be erected [the weight is evenly distributed on the feet]. It is also suitable for the type of shoes.

　　襪子進行測量

4. the circumference of the foot.

The projection of 5. feet and feet around the horizontal plane.

6. generally normal feet are defined according to statistical results and anatomical studies.

　　該標準鞋號制的基本特點：

The shoe number is based on the international system of units (SI), and the measurement of feet is based on the international system of units.

　　鞋號制基于以下兩項測量值：

A) foot length (defined in standard 3).

B) foot width (as defined in standard 5).

Note: the above rule does not exclude the use of foot girth in all stages of shoemaking.

　　確定鞋號的方法：

Each shoe number is determined according to the measured value of the corresponding normal foot.

　　鞋號測量值的表示方法：

The measured value corresponding to the foot length and the foot width must be expressed in millimeter numbers.

Note: this rule does not exclude the use of code as auxiliary representation of foot width.

　　鞋號標識方法：

L. logo element shoe number identification should include foot length indication value, and then (if required) is foot width indication value.

2. location of logo

A) shoes on a pair of shoes should be clearly marked and readable in each shoe.

B) when the shoe is packed in shoes or other packages, the shoe number should also be marked on the package.

3. the form of identification and the methods adopted (stamping, printing, labeling, etc.) are arranged by the manufacturer.

The conversion of the existing shoe number system to any shoe number system that is different from the world shoe number shall be made with the corresponding world shoe number. The method is to convert the existing shoe number into the corresponding length (which is expressed in millimeters) for the general normal foot.

Appendix A of shoe number standard (Appendix to the prompts): example of identification of shoe number:

The Al shoe number can be expressed by the foot length value and the foot width indication value of millimeter.

A2 can also be represented by the millimeter integer and "type" of the foot length, but the type code is represented by brackets.

China shoes No. 241/2 two is pformed into world shoe number 245 (2); Chinese shoes 26 two type half converted to world shoe number 260 (2).