Home >

Shoemaking Process: Introduction Of Footwear Adhesive Combination Process

2009/2/18 14:17:00 41988

??? 日本語 Fran?ais English 中文

Use adhesive to help feet, bottom and outsole combined with the processing technology is called the adhesive technology.

Adhesive technology has the characteristics of short production cycle, high processing efficiency, simple operation, low cost, low production scale and equipment requirements. At present, the production process is widely used in the international shoe making industry.

(1) help feet to process.

Its technological process is: pulling out the nails, fixing the nails, trimming the stubble, gluing the feet, leveling the feet, filling the bottom of the heart, processing the adhesive surface, drawing the outer base line.

(2) glue binding process.

After processing, the rubber can be brushed, dried, activated and bottomed out.

涂刷膠黏劑。

A. purifying sticky surface.

In general, we use mechanical bristle wheel for dust removal or air blowing with compressed space gas.

B. blending.

In addition, different types and proportions of curing agents are added to the adhesive to improve the adhesion.

C. brush operation.

In addition to automatic spraying, the rubber brush is commonly used.

膠膜的烘干活化。當經過刷膠操作后，半成品鞋需直接進入干燥通道進行烘干與活化。其作用為可以加快膠黏劑中溶劑及水分揮發，縮短加工時間，提高膠粘質量。

烘干活貨的程度一般為指觸法檢驗，即用手指觸膜膠膜，感覺膠膜既略有黏感，又不再濕黏，即“八分干”時為宜。此法適用于氯丁膠，而樹脂膠則需干爽時，才合適。

黏合外底。