The structure of the outer ear type short tube boots is formed by grafting the outer ear structure into the low tube boots.

1. finished product drawing

As shown in figure 5-2-4, this is a heavy short tube boot. The front part is a whole piece. The shoes behind are inserted into the front part, and are sewn with 4 clear lines, which are very firm and echo with the thick soles.

There are 7 eye positions on the ear of the shoe. The rear part of the shoe has a rear reinforcement member. The rear end of the cylinder is wrapped with soft leather for foam material and is comfortable to wear.

This is the "forest boots" mentioned earlier.

 

The design of forest boots has put forward a "conceptual design", from "forest" will remind people of nature, associating fresh air, and associating with environmental protection.

It is the concept of "forest" that caters to the growing nostalgia mentality of Americans in the 1970s and their strong interest in ecology.

In the present market, we can still see the improved version of forest boots.

2. structure design drawing

As shown in figure 5-2-5, the frame diagram is set up for the height of 15 0mm and the width of the cylinder mouth 120rnm. According to the design rule of the outer ear shoe, the 01 points are determined, the design of the cylinder mouth, the design of the shoe ear contour, the connection of the front side break line, and then the location of the O2 point of the Huai Huai is determined.

 

The front gang has a reverse process in front of the shoe ear.

The location of the door is o'away from the shoe ear 20~25mm.

The broken tongue line is hidden behind the first eye position.

An average of 7 eyes were allocated.

The upper part of the back is designed with soft parts.

The rear reinforcement is designed in the rear arc.

The first and second eye tracks are stitched and reinforced.

Other designs are high waist shoes.