Regular inspection Roller spindles

Ensure normal operation of equipment.

The Zinser 668 roving frame uses 4 variable frequency motors to separately drive the draft roller spindle and the Dragon bar. Under the computer control, the winding and forming of the roving can be completed and the constant tension winding can be realized. Zinser 668 roving frame has obvious advantages in improving output, ensuring quality, reducing faults and convenient maintenance. However, due to its high installed power and high comprehensive energy consumption, it is necessary to be familiar with common failures and troubleshooting methods.

Gaoyou Jingwei Textile Co., Ltd. is using Zinser 668. Roving frame 時遇到一些常見設備故障，其相應解決辦法為：錠翼與筒管傳動帶張緊，軸承(6206)因無法加油經常損壞，可更換為可加油軸承;導條羅拉傳動軸承配置偏小(6002)經常損壞，應定期檢查更換;錠翼防護門上的卷掛簧以及塑料門易損壞，發現不靈活或損壞時要及時更換;下絨板支撐塑料件彈性較差變形較多，影響清潔效果，解決辦法是整臺車改為彈簧鋼片;錠翼防塵套和假捻器磨碰易產生防護套跳動，可將防塵套全部進行車削改造;前集束器與前羅拉間隙太小，經常出現繞羅拉皮輥皮圈的現象，解決辦法是更換為天津紡機廠FA401-2100-34A型集束器;龍筋伸降齒輪箱內的蝸輪易損壞，應更換齒輪箱或加工蝸輪予以更換;錠桿與粗紗管間間隙過小，飛花、粗紗頭易夾入造成粗紗管隨錠桿上下運動，導致錠桿變形，解決辦法是更換錠翼，落紗時插管正確，減少飛花，保證粗紗管內無雜物， Or change the diameter of the upper end of the roving tube, and remake the roving tube with a larger diameter. Wang Changhong, Jiangsu Jingwei Textile Co., Ltd., Gaoyou

　　 Core spun yarn Solid yarn three yarn coordination

Modification of roving frame to produce fancy yarn

At present, the roving frame of textile enterprises is only used to produce roving, and the roving roving needs to enter the lower spinning process to be sold or used as finished products. The roving produced by the existing roving frame has no change in structure and can not spin yarns that can be directly used for weaving.

When using roving machine to produce roving yarn, three kinds of yarns are needed. They are core yarn, yarn and yarn respectively. In general, the lower number of cotton sliver is used as the yarn to feed the rollers of the roving machine in turn. At the same time, two filaments are used as core yarn and solid yarn respectively. The core yarn and the solid yarn are fed at the front middle roller of the roving frame. The core yarn is output from the front roller at the same time as the draft bar is pulled out. After twisting, the core yarn enters the magnetic guide eye of the guide yarn. The yarn is guided by the guide bar to separate into the guide magnetic eye after the output of the former roller.

In order to produce the roving fancy yarn, we have carried out the transformation of the FA415 roving machine from the following aspects. First, add the spindle seat. The ordinary roving machine only needs to feed the sliver when it is running, but when it is used to produce roving, it needs 3 feeding ports, so 2 rows of spindles need to be added, 1 of which are used for core spun yarn. Secondly, to increase the guide bar and spring tension device, a total of 3 guide bars should be added, of which 2 are the common guide yarn and the solid yarn, and 1 are used for guiding the yarn fixation separately. Finally, a yarn guide device is added. Yang Liu, Guangzhou textile and clothing Research Institute Co., Ltd.

　　 Refitted movable bobbin

Saving roving test time

The traditional bobbins with elongated roving are the bobbins normally used by roving frames. For the spindle roving frame, the test elongation is easy to operate, but for the modern roving frame, because the ingot is mostly suspended, the test is relatively complicated. When the roving machine is doffed, it will need to adjust the lifting dragons to drive the head when the doffing is done. It will only make sure the bobbin is fixed when the Xialong bar rises to a certain height. It is more troublesome to do roving elongation test, especially in Konaka Sato. When the roving elongation test is to be done on the roving frame, the bobbin must be removed and the Xialong ribs are not at the lowest position when the roving frame is shut down in the non doffing state. Only when the dragons are manually lowered the doffing position can the bobbin be removed, but this will cause serious roving breakage on other spindles and increase the labor intensity of the truck.

To solve this problem, employees of the company have been thinking and trying to reconstruct the roving bobbin, that is, using the top movable bobbin to solve this problem. The height of the movable bobbin is the same as that of the normal bobbin, and the top of the movable bobbin can be rotated clockwise. Since the bobbin and the wing are aligned and clockwise rotate, the bobbin head can be designed to rotate counterclockwise to ensure that the bobbin has self tightening function when it is rotated. After the modification is made, only the movable screw head of the top of the bobbin can be turned off when the test yarn is made. In this way, the bobbin height and the inner diameter of the bobbin can be reduced, and the sample of elongation test can be easily removed without downgrading the reinforcement.

The roving bobbin has been popularized in 3 branches of the company. After a long period of follow-up investigation, the company staff agreed that the bobbin not only saves the adjustment time of dragons and stems, but also facilitates the operation of the experimenters. It improves the efficiency of the roving machine and the efficiency of the experimenters, and guarantees the timeliness of the roving elongation test.